Vivotek MS8391-EV, User Manual

Page: 195 / 235

VIVOTEK
User's Manual - 195
URL Command Document for All Series391
59
maxfps_mjpeg A list of
<Positive
Integer> and
"-" 7,
7,
7,
7,
7,
7,
7 0/99 Maximum fps which the device can
encoded with MJPEG on resolutions in
this video mode.
"-" means not support.
maxfps_h264 A list of
<Positive
Integer> and
"-" 7,
7,
7,
7,
7,
7,
7 0/99 Maximum fps which the device can
encoded with H.264 on resolutions in
this video mode.
"-" means not support.
* One to one mapping to the resolution
in "resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter records the frame
rate when
"videoin_c<n>_cmosfreq"=60 or
"videoin_c<n>_modulation"=ntsc
* Only available when 'h264' is listed
in "capability_videoin_codec".
description <String[128]
>
na
0/99 Description about this mode.
7.25 Customized event script
Group: event_customtaskfile_i <0~2>
PARAMETER VALUE DEFAULT SECURITY
(get/set) DESCRIPTION
name string[40] NULL 6/6 Custom script identification of this
entry.
date string[4-20] NULL 6/6 Date of custom script.
time string[4-20] NULL 6/6 Time of custom script.
URL Command Document for All Series391
60
7.26 Event setting
Group:
event_i
<0~2>
PARAMETER VALUE DEFAULT SECURITY
(get/set) DESCRIPTION
name string[40] NULL 6/6 Identification of this entry.
enable 0, 1 0 6/6 Enable or disable this event.
priority 0, 1, 2 1 6/6 Indicate the priority of this event:
“ 0 ” = low priority
“ 1 ” = normal priority
“ 2 ” = high priority
delay 1~999 10 6/6 Delay in seconds before detecting the
next event.
trigger boot,
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
vadp boot 6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“ pir ”= PIR detection
“motion” = Video motion detection
“seq” = Periodic condition
“recnotify” = Recording notification.
“tampering” = Tamper detection.
“vi”= Virtual input (Manual trigger)
“ volalarm ” = Audio detection.
“ vadp ” = VADP trigger
triggerstatus String[40] trigger 6/6 The status for event trigger
di 0, 1 1 6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is “di”.
One bit represents one digital input.
The LSB indicates DI 0.
vi 0~7 0 6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is “vi”.
One bit represents one digital input.
The LSB indicates VI 0.