VIVOTEK
User's Manual - 145
URL Command Document for All Series391
9
6. Set Server Parameter Values
Note:
The access right depends on the URL directory.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/
anonymous
/setparam.cgi?
<parameter>=<value>
[&<parameter>=<value>
…]
[&return=<return page>]
http://<
servername
>/cgi-bin/
viewer
/setparam.cgi?
<parameter>=<value>
[&<parameter>=<value>
…]
[&return=<return page>]
http://<
servername
>/cgi-bin/
operator
/setparam.cgi?
<parameter>=<value>
[&<parameter>=<value>
…]
[&return=<return page>]
http://<
servername
>/cgi-bin/
admin
/setparam.cgi?
<parameter>=<value>
[&<parameter>=<value>
…]
[&return=<return page>]
PARAMETER
VALUE
DESCRIPTION
<group>_<name>
value to assigned
Assign
<value>
to the parameter
<group>_<name>.
return
<return page>
Redirect to the page
<return page>
after the parameter is
assigned
.
The
<return page>
can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
(Note: The return page can be a general HTML file
(.htm, .html). It cannot be a CGI command or have any extra
parameters. This parameter must be placed at the end of the
parameter list
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
URL Command Document for All Series391
10
Only the parameters that you set and are readable will be returned.
Example:
Set the IP address of server to 192.168.0.123:
Request:
http://myserver/cgi-bin/admin/setparam.cgi?network_ipaddress=192.168.0.123
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network_ipaddress=192.168.0.123\r\n
