Vivotek MD8562 User Manual Download

Page: 66 / 191

VIVOTEK

66 - User's Manual

■ Enable low light compensation: Select this option in low light mode, and the values of sharpness and

brightness will change automatically as the noise reduction function.

WDR enhanced

: This function allows users to identify more image details with an extreme contrast

from an object of interest with one shadowed side against a bright background, e.g., the entrance into a

building. You may select the

Enable WDR enhanced

checkbox, and then adjust the sensitivity (low, high)

and the strength (low, medium, high) to reach the best image quality.

You can click

Preview

to fine-tune the image, or click

Restore

to recall the original settings without

incorporating the changes. When completed with the settings on this page, click

Save

to enable the

setting.

Summary of Contents for MD8562
































































































































































































Search results

Summary of Contents for MD8562

Reviews:

Related manuals for MD8562

Brands by name

Popular brands

Vivotek MD8562, User Manual

Search results

Summary of Contents for MD8562

Reviews:

Related manuals for MD8562

Brands by name

Popular brands