manualshive.com logo in svg

Vivotek IP8372, User Manual

The Vivotek IP8372 is a cutting-edge surveillance camera system featuring advanced technology for high-resolution video monitoring. To ensure a hassle-free setup, a Quick Installation Manual is provided. Easily access the comprehensive product manual, offering detailed instructions and configuration assistance, available for free download on our website.

Share
Download
background image

 

 

VIVOTEK

 

User's Manual - 109  

A green bar indicates that even though motions have been detected, the event has not been triggered 

because the image variations still fall under the defined threshold.

If you want to configure other motion detection settings for day/night/schedule mode, please click 

Profile

 

to open the Motion Detection Profile Settings page as shown below. A total of three motion detection 

windows can be configured on this page as well. 

Please follow the steps beolw to set up a profile:

1. Create a new motion detection window.

2. Check 

Enable this profile

.

3. Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a time 

range if you choose Schedule mode.

4. Click 

Save

 to enable the settings and click 

Close

 to exit the page.

This motion detection window will also be displayed on the Event Settings page. You can go to Event 

> Event settings > Trigger to choose it as a trigger source. Please refer to page 113 for detailed 

information.

Percentage = 30% 

Video(TCP-AV)

2010/12/10  17:08:56

Summary of Contents for IP8372










































































































































































































Reviews:

No comments

Related manuals for IP8372

Barnett Engineering ProTalk Cv3 Replacement Instructions preview
ProTalk Cv3
Brand: Barnett Engineering Pages: 3
Labkotec SET-2000 Oil/Sludge Lnstallation And Operating Lnstructions preview
SET-2000 Oil/Sludge
Brand: Labkotec Pages: 14
Wansview W7 Installation Manual preview
W7
Brand: Wansview Pages: 12
QSee Plus Series Quick Start Manual preview
Plus Series
Brand: QSee Pages: 9
SECO-LARM Enforcer series Manual preview
Enforcer series
Brand: SECO-LARM Pages: 8
Q-See QC804-261-1 NVR Product Information preview
QC804-261-1 NVR
Brand: Q-See Pages: 11
Rohm BD47 G Series Technical Notes preview
BD47 G Series
Brand: Rohm Pages: 9
SecurityMan SM-3032S User Manual preview
SM-3032S
Brand: SecurityMan Pages: 2
ADT SECURITY MANAGER 2000 User Manual preview
SECURITY MANAGER 2000
Brand: ADT Pages: 44
RAM CSS300 User Manual preview
CSS300
Brand: RAM Pages: 38
BUCKINGHAM MFG 355B Manual preview
355B
Brand: BUCKINGHAM MFG Pages: 2
R&TTE CC-400 Instruction Manual preview
CC-400
Brand: R&TTE Pages: 2
SALUPO SS101 Series Instruction And Installation Manual preview
SS101 Series
Brand: SALUPO Pages: 12
Delta AlertMaxx DMS-269 Installation & Operating Instructions Manual preview
AlertMaxx DMS-269
Brand: Delta Pages: 16
echa MICROBMONITOR2 Instructions For Use Manual preview
MICROBMONITOR2
Brand: echa Pages: 12
M-system M1EAXV-2 Instruction Manual preview
M1EAXV-2
Brand: M-system Pages: 6
MAKS Water Quick User Manual preview
Water
Brand: MAKS Pages: 2
Agni AGNI-203 Quick Start Manual preview
AGNI-203
Brand: Agni Pages: 2

Brands by name

Popular brands

Load more brands