Vivotek IP8371E User Manual Download

Page: 8 / 203

VIVOTEK

8 - User's Manual

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes

resetting the system can return the camera to normal operation. If the system problems remain

after reset, restore the factory settings and install again.

Reset: Press and release the recessed reset button. Wait for the Network Camera to reboot.

Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that

all settings will be restored to factory default. Upon successful restore, the status LED will blink

green and red during normal operation.

SD/SDHC/SDXC Card Capacity

This network camera is compliant with

SD/SDHC/SDXC

16GB / 8GB / 32GB /64GB and other

preceding standard SD cards.

Reset Button

Summary of Contents for IP8371E












































































































































































































Search results

Summary of Contents for IP8371E

Reviews:

Related manuals for IP8371E

Brands by name

Popular brands

Vivotek IP8371E, User Manual

Search results

Summary of Contents for IP8371E

Reviews:

Related manuals for IP8371E

Brands by name

Popular brands