VIVOTEK
User's Manual - 109
In the Event settings column, the Servers and Medias you configured will be listed; please make sure the
Event -> Status is indicated as ON, in order to enable the event triggering action.
When completed, click
Save
event
to enable the settings and click
Close
to exit Event Settings page.
The new Event / Server settings / Media will appear in the event drop-down list on the Event setting
page.
Please see the example of the Event setting page below:
When the Event Status is
ON
, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail.
If you want to stop the event trigger, you can click
ON
to turn it to
OFF
status or click
Delete
to remove
the event setting.
To remove a server setting from the list, select a server name from the drop-down list and click
Delete
.
Note that only when the server setting is not being applied to an event setting can it be deleted.
To remove a media setting from the list, select a media name from the drop-down list and click
Delete
.
Note that only when the media setting is not being applied to an event setting can it be deleted.
