manualshive.com logo in svg

Vivotek IP8337H-C, User Manual

The Vivotek IP8337H-C camera is an advanced surveillance solution equipped with high-resolution image capture capabilities. Ensure a hassle-free setup using the included Quick Installation Manual. Easily download the user manual for free, exclusively on manualshive.com, to maximize your understanding and optimize the camera's performance.

Share
Download
background image

 

 

VIVOTEK

 

50 - User's Manual

Please follow the steps below to setup a profile:

1. Check 

Enable this profile

.

2. Select the applied mode: Day mode, Night mode, 

or Schedule mode. Please manually enter a range 

of time if you choose Schedule mode.

3. Configure Exposure control settings in the folowing 

columns. Please refer to previous dicussions for 

detailed information.

4. Click 

Save

 to enable the setting and click 

Close

 to 

exit the page.

You can click 

Restore

 to recall the original settings without incorporating the changes. When 

completed with the settings on this page, click 

Save

 to enable the settings.

If you want to configure another sensor setting for day/night/schedule mode, (namely, for a 

particular lighting condition for a specific period of time), please click 

Profile

 to open the Profile of 

exposure settings page as shown below.

Activated period

: Select the mode this profile to apply to: Day mode, Night mode, or Schedule 

mode. Please manually enter a range of time if you choose Schedule mode. Then check 

Save

 to 

take effect.  

Summary of Contents for IP8337H-C












































































































































































































Reviews:

No comments

Related manuals for IP8337H-C

Samsung SSA-R1001 Specifications preview
SSA-R1001
Brand: Samsung Pages: 1
Easy Clocking EC 200 Basic Software Setup Manual preview
EC 200
Brand: Easy Clocking Pages: 23
ACTi ACM-3701E Installation Manual preview
ACM-3701E
Brand: ACTi Pages: 19
ACTi ACM-3701E Hardware User Manual preview
ACM-3701E
Brand: ACTi Pages: 19
Yoko Technology RYK-IP2280 User Manual preview
RYK-IP2280
Brand: Yoko Technology Pages: 58
Novus NVAHD-2DN3201MH/IR-1-PIR User Manual preview
NVAHD-2DN3201MH/IR-1-PIR
Brand: Novus Pages: 32
DualLite SEWL Series Installation, Operation And Maintainance Instructions preview
SEWL Series
Brand: DualLite Pages: 2
Bushnell Trophy Cam 119636C Instruction Manual preview
Trophy Cam 119636C
Brand: Bushnell Pages: 36
Stealth Cam STC-AD2 User Manual preview
STC-AD2
Brand: Stealth Cam Pages: 48
Abus SECVEST Installation Instructions And User Manual preview
SECVEST
Brand: Abus Pages: 61
M-system M8SED Instruction Manual preview
M8SED
Brand: M-system Pages: 2
Konig SAS-SETIPC011W Quick Start Manual preview
SAS-SETIPC011W
Brand: Konig Pages: 48
Robotics Technologies Bus-Scan ALERT Installation & Operation Manual preview
Bus-Scan ALERT
Brand: Robotics Technologies Pages: 11
Amcrest IP5M-T1273EB-AI User Manual preview
IP5M-T1273EB-AI
Brand: Amcrest Pages: 62
Apexis APM-J012-L-WS User Manual preview
APM-J012-L-WS
Brand: Apexis Pages: 55
Blaupunkt VIO-B10 Quick Start Manual preview
VIO-B10
Brand: Blaupunkt Pages: 61
Lorex SG21CD7484UQ-A80 Instruction Manual preview
SG21CD7484UQ-A80
Brand: Lorex Pages: 35
Visonic GB-501 PG2 Installation Instructions Manual preview
GB-501 PG2
Brand: Visonic Pages: 6

Brands by name

Popular brands

Load more brands