VIVOTEK
User's Manual - 31
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN setting on page 85 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please
refer to PPPoE on page 86 for details.
Configure the router, virtual server, or firewall, so that the router can forward any data
coming into a preconfigured port number to a network camera on the private network, and
allow data from the camera to be transmitted to the outside of the network over the same
path.
From
Forward to
122.146.57.120:8000
192.168.2.10:80
122.146.57.120:8001
192.168.2.11:80
...
...
When properly configured, you can access a camera behind the router using the HTTP
request as follows: http://122.146.57.120:8000
If you change the port numbers on the Network configuration page, please open the ports
accordingly on your router. For example, you can open a management session with your
router to configure access through the router to the camera within your local network.
Please consult your network administrator for router configuration if you have troubles with
the configuration.
For more information with network configuration options (such as that of streaming ports),
please refer to Configuration > Network Settings. VIVOTEK also provides the automatic
port forwarding feature as an NAT traversal function with the precondition that your router
must support the UPnP port forwarding feature.
Summary of Contents for IP816A-LPC
Page 11: ...VIVOTEK User s Manual 11 ...
