Vivotek IP8160 User Manual Download

Page: 244 / 351

VIVOTEK

244 - User's Manual

wdrpro

0, 1, 2

0/7

Indicate this mode whether support WDR pro.

0: Non-support WDR Pro

1: Support WDR Pro

2: Support WDR Pro and WDR Pro II

* We support this parameter when the version

number (httpversion) is equal or greater than

0304b.

effectivepixel

<WxH>

0/7

The visible area of full scene in this video mode.

The unit is pixel in source.

* If

"effectivepixel"<"capability_videoin_c<0~(n-1)

>_maxsize", then the visible area is located at

the center of full scene.

outputsize

<WxH> 0/7

The output size of source, equal to the captured

size by device, in this video mode. The unit is

pixel.

This value is used as a basic coordinate system

for many features, like ePTZ, privacy mask,

motion, etc.

* Source (most for image sensor) may perform

scale or binning, etc on image data, and output

data with smaller size. This parameter is

designed to represent this.

binning

0, 1, 3

0/7

Indicate binning is used or not in this video

mode.

0: No binning

1: 2x2 binning

3: 3x3 binning

* Binning is a technology to increase light

sensitivity by combining multiple pixels to one.

The drawback is reduced resolution. We design

this parameter to disclose this information.

nresolution

0/7

How many resolution options in this video mode.

Summary of Contents for IP8160
































































































































































































































































































































































Search results

Summary of Contents for IP8160

Reviews:

Related manuals for IP8160

Brands by name

Popular brands

Vivotek IP8160, User Manual

Search results

Summary of Contents for IP8160

Reviews:

Related manuals for IP8160

Brands by name

Popular brands