Vivotek IP8130 User Manual Download Page 49

Page: 49 / 196

VIVOTEK

User's Manual - 49

You can click

Restore

to recall the original settings without incorporating the changes� When

completed with the settings on this page, click

Save

to enable the settings�

If you want to configure another sensor setting for the schedule mode, please click

Profile

to open

the Profile of exposure settings page as shown below.

Activated period:

Select the period of time this profile setting will apply to. Please manually enter

a range of time in a day, fune the Measurement window and Exposure control settings, and then

cliack

Save

for the configuration to take effect.

Please follow the steps below to setup a profile:

1� Select

Enable and apply this profile to

�

2� Select Day mode, night mode, or Schedule time

by entering a range of time for this profile to

apply to�

3� Select the Measurement window setting�

4� Configure Exposure control settings in the

folowing columns� Please refer to previous

dicussions for detailed information�

5� Click

Save

to enable the setting and click

Close

to exit the page�

Summary of Contents for IP8130





































































































































































































Search results

Summary of Contents for IP8130

Reviews:

Vivotek IP8130, User Manual, Page: 49 / 196

Search results

Summary of Contents for IP8130

Reviews: