VIVOTEK - A Leading Provider of Multimedia Communication Solutions
8 - User's Manual
2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192�168�0�3, please forward the following ports for the Network Camera on the router�
■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router� For information on how to forward ports on the router, please refer to the user’s
manual of your router�
3� Find out the public IP address of your router provided by your ISP (Internet Service Provider)�
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet� Please refer to Network Type on page 24 for details�
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera and
follow the steps below�
1� Set up the Network Camera in a LAN� Please refer to Software installation on page 10 for
details�
2. Go to Configuration > Network > Network Type. Select LAN > Use fixed IP address.
3� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line� Please refer to
PPPoE on page 25 for details�
Summary of Contents for IP7251
Page 1: ......
