VIVOTEK - A Leading Provider of Multimedia Communication Solutions
62 - User's Manual
Preset Positions
If you select DynaDome/SmartDOME, Lilin PIH-7x00, or Pelco D protocol as the PTZ driver and click
the
Save
button, the
Preset Position
button will be enabled� Click
Preset Position
to open the settings
page. You can also select preset positions for the camera to patrol. A total of 20 preset positions can be
configured.
Please follow the steps below to preset a position:
1� Adjust the shooting area to the desired position using the buttons on the right side of the window�
2� Enter a name for the preset position, which allows for up to forty characters� Click
Add
to enable the
settings� The preset positions will be displayed under the Preset Location list on the left-hand side�
3� To add additional preset positions, please repeat steps 1~2�
4� To remove a preset position from the list, select it from the drop-down list and click
Delete
�
5. You can click “Go to” to aim the camera at a preset position, which will also displayed on the main
page�
Please refer to the illustration on the next pag
e�
6� Click
Save
to enable the settings�
Functions are the same
as the Control Panel on
the home page
1
2
4
6
2
Summary of Contents for IP7142
Page 1: ......
