VIVOTEK
User's Manual - 69
IR cut filter
With a removable IR-cut filter, this Network Camera can automatically remove the filter to let
Infrared light pass into the sensor during low light conditions.
■ Auto mode (The
Day/Night Exposure Profile
will not be available if Auto mode is selected)
The Network Camera automatically removes the filter by judging the level of ambient light.
■ Day mode
In day mode, the Network Camera switches on the IR cut filter at all times to block infrared light
from reaching the sensor so that the colors will not be distorted.
■ Night mode
In night mode, the Network Camera switches off the IR cut filter at all times for the sensor to
accept infrared light, thus helping to improve low light sensitivity.
Light sensor sensitivity
Tune the re
sponsiveness of the IR filter to lighting conditions as Low, Normal, or High.
When completed with the settings on this page, click
Save
to enable the settings.
Summary of Contents for FD9165-HT
Page 97: ...VIVOTEK User s Manual 97...
