VIVOTEK
User's Manual - 69
An event is an action initiated by a user-defined trigger source; it is the causal arrangement of the
following three elements: Trigger, Event Schedule, and Action�
Trigger
This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can
be configured to use the Network Camera’s built-in motion detection mechanism.
There are several choices of trigger sources as shown below� Select the item to display the detailed
configuration options.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source� To enable this
function, you need to configure a Motion Detection Window first. For more information,
please refer to
Motion Detection on page 61 for details�
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed�
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected�
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data� If you want receive
Recording notify message
, please refer to page 78
for detailed information�
■ Temperature Alarm
This option allows the Network Camera to trigger once the temparature inside the Network Camera
reaches 60°C�
Summary of Contents for FD7130
Page 1: ......
