VIVOTEK
94 - User's Manual
PTZ > PTZ settings
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.
There are two ways to enable the camera control function:
1�
Digital
: Control the e-PTZ operation. Within a field of view,it allows users to quickly move the
focus to a target area for close-up viewing without physically moving the camera�
2�
Mechanical
: Connect the Network Camera to a PTZ driver or scanner via RS485 interface.
Digital PTZ Operation (E-PTZ Operation)
The e-PTZ control settings section will be displayed as shown below:
Select Stream
: Select a video stream to set up the e-PTZ control. Please note that each stream can
possess its own preset and patrol settings� For detailed information about how to set up preset and patrol
settings, please refer to page 96�
Auto pan/patrol speed: Select the speed from -5 to 5 (slow/fast) to set up the Auto pan/patrol speed
control�
Zoom factor display
If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the
live viewing window as the picture shown on the next page�
When completed with the e-PTZ settings, click
Save
to enable the settings on this page�
x1.8
x1.8
