VIVOTEK
114 - User's Manual
In the Event settings column, the Servers and Medias you configured will be listed; please make sure the
Event -> Status is indicated as
ON
, in order to enable the event triggering action�
When completed, click the
Save
event
button to enable the settings and click
Close
to exit Event
Settings page�
The new Event / Server settings / Media will appear in the event drop-down list on the
Event setting page�
Please see the example of the Event setting page below:
When the Event Status is
ON
, the event configuration above is triggered by motion detection, the
Network Camera will automatically send snapshots via e-mail�
If you want to stop the event trigger, you can click on the
ON
button to turn it to
OFF
status or click the
Delete
button to remove the event setting�
To remove a server setting from the list, select a server name from the drop-down list and click
Delete
�
Note that you can only delete a server setting when it is not applied in an existing setting�
To remove a media setting from the list, select a media name from the drop-down list and click
Delete
�
Note that you can only delete a media setting when it is not applied in an existing setting�
