VivoLink VL120026, User Manual, Page: 8 / 48

6-input Seamless Scaler Switcher & HDBaseT Receiver
3
2. Panel Description
2.1 Seamless Scaler Switcher

Front Panel
①
Built-in IR Receiver.
②
Power Indicator- RED when the device is in standby, GREEN when device is
powered on and no indicator when there is no power to device.
③
1-HDMI/MHL input selector and activity LED/ Left key for OSD.
④
2-HDMI input selector and activity LED/ Right key for OSD.
⑤
3-HDMI input selector and activity LED/ Up key for OSD.
⑥
4-HDMI input selector and activity LED/ Down key for OSD.
⑦
5-DP input selector and activity LED/ ENTER key for OSD.
⑧
6-VGA input selector and activity LED/ OSD menu button.
⑨
Auto switching selector and activity LED.

Press this to enter or exit auto-switching mode.

Long-press this button 3 seconds or more to reset output resolution to 720p or to
activate HDMI and HDBT outputs if they have been turned off.
Note: When you set any VGA port to C-video or YPbPr in Manual-switching mode,
the system will not be able to enter Auto-switching mode.
⑩
Volume knob for variable audio control- Push knob
in to toggle between ‘MIX’ and
‘Source’ control.
VOLUME
IR
SOURCE
MIX
1-HDMI/MHL 6-VGA 5-DP 3-HDMI 4-HDMI 2-HDMI AUTO
RES RESET/3s MENU/3s ENTER
1
2
3 4 5 6 7 8 9 10