-6-
Assembly Steps
STEP 2
8
8
x 1 pc.
x 20 pcs.
E
STEP 1
x 4 pcs.
J
J
E
J
J
J
J
X4
Assemble a footpad onto Part J. Repeat this process three more times so that there
are four total cabinet legs.
Use Parts E (20 pcs.) to fix Parts J (4 pcs.) on Board 8, as shown in the figure. First, insert
Parts E (12 pcs.) into the pre-drilled holes of both Parts J and Board 8. Then, insert
Parts E (8 pcs.) through the remaining holes of Parts J (note: there are no pre-drilled
holes at these locations on Board 8—the user must use force to insert the screws).
There should be five Parts E per one Part J.
