-17-
Assembly Steps
STEP 23
x 10 pcs.
E
180°
E
E
2
G
G
Note: This dressing table has two assembly methods, as shown in the figure.
If you want a dressing table like the
left figure, please follow Steps 23 - 25.
If you want a dressing table like the
right figure, please follow Step 26.
You must follow Steps 27 - 31 to complete the final assembly regardless of which assembly
method you choose.
Use Parts E (10 pcs.) to fix Parts G (2 pcs.) on Board 2, as shown in the figure. First,
insert Parts E (6 pcs.) into the pre-drilled holes of both Parts G and Board 2. Then,
insert Parts E (4 pcs.) through the remaining holes of Parts G
(note: there are no pre-drilled holes at these locations on Board 2—the user must
use force to insert the screws). There should be five Parts E per one Part G.
