3
STEP 3
STEP 5
While holding the monitor down, gentely rotate the
VESA Adapter
(A)
until the bottom bracket of the
adapter rests against the back of the montitor.
CAUTION:
This adapter is designed only to support the
monitor in standard landscape view. Do NOT rotate the
monitor upside-down or for portrait view.
STEP 2
Insert the VESA Adapter
(A)
into the monitor,
and secure with the M3x11 screw
(B)
.
A
B
D
C
Insert the M4x50 Screws
(E)
into the available top two
holes in the VESA Adapter
(A)
. Attach the Compression
Pads
(F)
to the ends of the M4x50 Screws
(E)
and then
gently tighten until the monitor is snug and wont
wobble forwards and backwards. Do not over tighten
as this may cause damage to the monitor.
Mount the adapter with monitor to your
VESA mount using M4x12 Thumbscrews
(C)
and M4 Washers
(D)
. Do not overtighten; the
thumbscrews only need to be finger-tight.
A
Bottom
Bracket
STEP 4
E
F
