Vivo STAND-V002P Instruction Manual Download Page 4

Page: 4 / 4

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by incorrect

assembly or inappropriate use.

Call: 1-800-371-5654

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

Safety Steps War Standning

Contact us Required: at: STAND-V002P

Last updated: 04/30/18

Step 7

Do not move monitors past center point of gravity. This could result in
tipping.

Adjust monitor height using 5mm allen key (G) as shown in diagram.

Step 8

Summary of Contents for STAND-V002P

Page 2: ...e cable management clip D and base cover E on to bottom of pole B Thread pole onto base A Tighten grub screws in bottom of base A using 3mm allen key F 2 Step 2 Step 3 Slide arm C over top of pole and tighten using 5mm allen key G Adjust bracket supporter using 3mm allen key F ...

Page 3: ...ed Align bolts M A M B in VESA plate Secure using two more bolts M A or M B and washers M C in the bottom two holes Tighten all four bolts using phillips screwdriver 3 Step 5 Step 6 Adjust tension in monitor bracket with 6mm allen key H as shown in diagram Store allen keys H G in cable management clip D for future adjustment ...