Step 4
Route cables through cable management clips (J) on back of
stand.
Mount monitor to TV plate (A) as shown in diagram. Tighten
safety bolts on bottom of monitor brackets (B) using phillips
head screwdriver.
Wood Stud Wall
If your TV is located near a wall as shown in Diagram 5a, then a
steel wire from security wire kit (X) can be attached for added
security. Attach the two ends of the steel wire to the top two
holes on the back of your TV as shown in Diagram 5b. Attach
the center loop to your wall according to wall type as shown in
Diagram 5c, 5d, 5e.
Step 5: OPTION A
5a
5c
5b
Wood Wall
Drill 1.75" (45mm) deep
holes using a 5/32" (or
3.8mm) drill bit. Secure with
screws and washers.
3
