As Required: s Required: embly Steps Steps Required:
Step 1
Option A: MOUNT-VW01 Wood Wall Mounting
Option B: MOUNT-VW01 Concrete/Brick Wall Mounting
Use mount (A) to mark mounting holes on wall where stud is
located. Using a 3/16” bit, drill approximately 2.2” into marked
locations. Secure mount (A) to wall using bolts (W-A) and
washers (W-C).
Use mount (A) to mark mounting holes on wall. Using a 3/8” bit,
drill approximately 2.4” into marked locations. Secure mount (A)
to wall using anchors (W-B) bolts (W-A) and washers (W-C).
1
2
Step 2
Attach plastic cover to mount (A).
Step 3
Attach cable management clip (F) as shown in diagram.
