4
STEP 4
Plug Power Cord
(H)
into Mount
(A)
. Place Power Cord
(H)
into the slot as shown and snap Wall Plate
Covers
(B)
in place.
STEP 3
(Option B)
Concrete/Brick Installation
Align the bottom edge of Stencil
(C)
with the measured height from step 1 and mark drilling locations
using a pencil. Use of a level is recommended. Remove Stencil
(C)
, drill 2.4” (60mm) deep holes using
a 3/8” (10mm) drill bit, and insert Anchors
(W-B)
into the holes. Attach Mount
(A)
to the wall using
ST6.3x55mm Screws
(W-A)
and Washers
(W-C)
and a 10mm socket.
A
A
C
W-B
W-B
W-C
W-A
