3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Ceiling
Using ceiling template
(C)
, mark exact location of
mounting holes. Drill pilot holes 2.2” deep using a
4.5mm drill bit. Insert two screws
(W-A)
, leaving a
5mm gap from ceiling. Hang the ceiling mount so that
the screws fit into the keyhole openings. Slide mount
backward, then secure using additional screws
(W-A)
with washers
(W-C)
.
OPTION B: Concrete Ceiling
Using ceiling template
(C)
, mark exact location of
mounting holes. Drill pilot holes 2.4” deep, using a
10mm drill bit. Insert six concrete anchors
(W-B)
, then
tighten two screws
(W-A)
, leaving a 5mm gap from
ceiling. Hang the ceiling mount so that the screws fit
into the keyhole openings. Slide mount backward,
then secure using additional screws
(W-A)
with washers
(W-C).
Tighten all screws.
NOTE:
If mounting to a wood beam ceiling, ensure the front and
back holes are used for the main support if mount is in line with
the beam. If perpendicular to the beam, use keyhole openings for
the main support. Do NOT use included concrete anchors
(W-B)
for
wood or drywall.
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
