background image

If you do not understand these directions, or if you have any 

doubts about the safety of the installation, please call a qualified 

technician. Check carefully to make sure there are no missing 

or defective parts. Improper installation may cause damage or 

serious injury. Do not use this product for any purpose that is 

not explicitly specified in this manual. Do not exceed weight capacity. We 

cannot be liable for damage or injury caused by improper mounting, incorrect 

assembly or inappropriate use.

PRE-ASSEMBLY

  |  BEFORE YOU BEGIN

Product Warranty

Returns | Product Didn’t Work Out?

For the most up to date details on your product’s warranty, please visit 

the product’s listing on our website or reach out to customer support. 

vivo-us.com/products/desk-v100eby

We offer a hassle-free 30 day return on all products. Contact customer 

support at 309-278-5303 or [email protected]. Please note: For items 

ordered in error or no longer needed, the return shipping charges will 

be at the buyer’s expense.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS 

REQUIRED.

WEIGHT CAPACITY

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. 

176lbs

 

(80kg)

!

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC 

SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• 

DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.

• 

DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.

• 

NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR 
SELLER TO REPLACE DAMAGED PARTS.

• 

NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE 
MADE CONTACT WITH LIQUIDS.

• 

ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.

• 

OUTDOOR USE IS PROHIBITED.

ELECTRICAL WARNING :

Summary of Contents for DESK-V100EBY





















Reviews: