5
ASSEMBLY STEPS
STEP 1
Screw the handle parts (
A
) together to create the handle.
STEP 2
Unscrew one end of the handle bolt
(C)
. Place the handle at the opposite end of
the cutting plate
(D)
face down as shown in the picture. Slide the handle bolt into
the aligned holes of handle and base of fry cutter. Screw nut back onto handle
bolt and tighten.
STEP 3
Unscrew one end of the bolt from
the push rods. Position the push rods
on each side of the handle and align
with corresponding holes. Insert bolt
through push rods and handle and
secure with nut.
Screw nut back
onto bolt.
