background image

2

If you do not understand these directions, or if you have any doubts about the safety 
of the installation, please call a qualified technician. Check carefully to make sure 
there are no missing or defective parts. Improper installation may cause damage or 
serious injury. Do not use this product for any purpose that is not explicitly specified 
in this manual and do not exceed weight capacity. We cannot be liable for damage 
or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: IMPORTANT SAFETY INFORMATION

READ AND FOLLOW ALL SAFETY REQUIREMENTS

• 

ALL MINORS MUST BE SUPERVISED WHILE MACHINE IS IN OPERATION.

• 

THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING 
CHILDREN) WHOSE PHYSICAL, SENSORY OR MENTAL CAPABILITIES MAY 
BE DIFFERENT OR REDUCED, OR WHO LACK EXPERIENCE OR KNOWLEDGE, 
UNLESS SUCH PERSONS RECEIVE SUPERVISION OR TRAINING TO OPERATE 
THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.

• 

WHEN MOUNTING FRY CUTTER FOR VERTICAL USE, MOUNT ONLY TO A SOLID 
SURFACE WHERE THE WALL STUD WILL SUPPORT THE FRY CUTTER.

• 

BEFORE USING FRY CUTTER, CHECK MOVING PARTS FOR ANY BINDING OR 
MISALIGNMENT. TAKE NOTE OF ANY OTHER CONDITIONS  THAT MAY AFFECT 
THE OPERATION OF THE PRODUCT.

• 

FRENCH FRY CUTTER SHOULD ONLY BE USED ON A FLAT, STABLE WORK 
SURFACE

WARNING:

  DO NOT USE DETERGENT WHEN CLEANING. ANY REMAINING 

DETERGENT RESIDUE WILL POLLUTE THE FRENCH FRIES. 

WARNING: 

NEVER OPERATE THE FRY CUTTER WITH HANDS IN LINE OF THE 

CUTTING BLADE. FAILURE TO KEEP FINGERS AND HANDS AWAY FROM THE 
CUTTING BLADE MAY RESULT IN SERIOUS PERSONAL INJURY.

WARNING: 

DO NOT USE FRY CUTTER WHILE UNDER THE INFLUENCE OF DRUGS 

OR ALCOHOL.

WARNING: 

DO NOT USE FRY CUTTER IN WAYS NOT INSTRUCTED IN THIS 

MANUAL. 

CAUTION: 

FOLLOW INSTRUCTIONS TO PREVENT INJURIES.

• 

BE CAUTIOUS OF SHARP EDGES. KEEP HANDS AND FINGERS CLEAR OF THE 
CUTTING SURFACE.

KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE

Summary of Contents for CUTR-F12









Reviews: