8
Mount Keyboard Shelf (D) to brackets with x6 M5x12 Flathead Screws (S-E) and tighten with a
Phillips screwdriver.
STEP 7: Install Keyboard Shelf
S-E
M5x12 Flathead
Screw
D
Keyboard Shelf
Ensure the handle is correctly pulling on the release cable. If the desk will not lock, the cable
tension is too high and will need to be decreased. If the desk will not raise or lower, the cable
tension is too low and will need to be increased.
Increase cable tension: Loosen both nuts holding the cable housing to the mounting bracket,
pull the cable housing away from the handle to increase the tension. Then re-tighten the two
nuts.
Decrease cable tension: Loosen both nuts holding the cable housing to the mounting bracket,
push the cable housing towards the handle to decrease the tension. Then re-tighten the two nuts.
STEP 8: Check Handle
D
S-E
Loosen/ Tighten nuts
to adjust
Cable Housing
Mounting Bracket
Handle
