Remove the exterior and interior packaging. Check that ice scoop is included. If
any parts are missing, please contact our customer service.
Clean the interior with lukewarm water and a soft cloth. Take out and clean the
ice basket.
Find a location for your ice maker that is protected from direct sunlight and
other sources of heat (e.g., stoves, furnaces, radiators). Place the ice maker on a
level surface. Make sure there are at least 4 inches of space between the back
and sides of your ice maker and other objects, including the wall.
Allow one hour for the refrigerant fluid to settle before plugging in the ice
maker.
The appliance must be positioned so that the plug is accessible.
Before placing the water bottle on the unit, make sure that the drain plug on
the back is tightly fastened.
Hold the water bottle vertically and upside down (over the unit) and place the
water bottle into the designated SMART CORE. Apply slight pressure to pierce
the bottle cap with the spigot. This unit accepts two-, three-, or five-gallon
water bottles with pierceable sealed caps.
OPERATING PROCEDURES & MAINTENANCE
-4-
- UNPACKING YOUR ICE MAKER
1.
2.
3.
4.
5.
6.
7.
PLACE BOTTLE
VERTICALLY
DOWN
