WARNING: This appliance must be grounded.
WARNING: Fill with drinking water only.
-2-
The wires attached to this machine are colored according to the following code:
[Green] or [Green with a yellow strip]: Grounding
[White]: Neutral
[Black]: Live
To avoid a hazard due to the instability of the appliance, the appliance must be
placed on an even or flat surface.
Please unplug the ice maker before cleaning or performing any repairs or main-
tenance.
Use with caution when electrical appliances are used near children.
Do not use your ice-maker outdoors. Place the ice-maker away from direct
sunlight and make sure that there is at least 4 inches of space between the
back of your unit and wall. Keep a minimum distance of 4 inches on each side
of your unit away from other items.
Do not use liquids other than water to make the ice-cubes.
Do not clean your ice maker with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not tip over the machine.
If the ice maker is brought in from outside in wintertime, give it a few hours to
warm up to room temperature before plugging it in.
WARNING:
This appliance must be grounded.
DANGER – Risk of fire or explosion. Flammable refrigerant used. Do
not use mechanical devices to defrost the ice maker. Do not
puncture refrigerant tubing. Repairs should only be conducted by
trained service personnel.
CAUTION – Risk of fire or explosion. Flammable refrigerant used. Consult repair
manual/Owner’s guide before attempting to install or service this product. All
safety precautions must be followed.
-
-
-
-
-
-
-
-
-
CAUTION – Risk of fire or explosion. Dispose of property in accordance with
federal or local regulations. Flammable refrigerant used.
CAUTION – Risk of fire or explosion due to puncture of refrigerant tubing.
Follow handling instructions carefully. Flammable refrigerant used.
The ice maker should be installed in accordance with the safety standard for
Refrigeration Systems, ASHRAE15. The ice maker shall not be installed in corri-
dors or hallways of public buildings.
If the unit has a problem and needs to be repaired or if parts need to be
replaced, it must be repaired by factory authorized maintenance personnel to
minimize the risk of ignition due to improper repairs.
-
-
-
-
IMPORTANT
