
- 53 -
3.
How are images from a USB storage device displayed?
Images and other content can be displayed by connecting the following devices to
Qumi:
USB flash drive (USB Type A)
microSD card
Once the devices are connected, images can be displayed by using Qumi’s
embedded Photo Player.
4.
What is the USB Type C port used for?
Qumi’s USB Type C port is used to connect with devices (Example: Smartphones*,
Tablets*, Computers*) that support DisplayPort signal output via USB Type C
support to play videos and images. A USB Type C to USB Type C data transfer
compatible cable (not included) is required.
*Not all USB Type C enabled devices support DisplayPort transmission functionality
to play videos and images. Check your device’s user manual or other documentation
to make sure that it can support DisplayPort transmission functionality for USB Type
C.
5.
Which cable is required for video devices to be connected with Qumi?
Video devices can be connected to Qumi by using an HDMI cable if the video devices
contain an HDMI appropriate output port.
6.
What type of video formats does Qumi support?
AVI//VOB/MOV/MKV/DAT/MPG/MP4
7.
What type of audio formats does Qumi support?
MP3/WMA/M4A/AAC
8.
What type of photo formats does Qumi support?
JPG/JPEG/BMP/PNG
9.
What type of document formats does Qumi support?
Microsoft® Office 97-2010 (Word, Excel® , PowerPoint® ), Adobe® PDF (1.0, 1.1,
1.2, 1.3, 1.4).
10.
How long will the LED light source in Qumi last and can it be replaced?
Qumi does not use a typical light source. It uses a set of Light Emitting Diodes (LED)
to illuminate and project images. LED’s have a greater lifespan than conventional
lamps. The Qumi’s LED is estimated to last for approximately 30,000 hours. The
lifespan of the LED depends on factors such as brightness, usage, environmental
conditions. LED brightness can decrease over time. The LED module is not
replaceable.
11.
Why do I need to re-adjust the focus on my Qumi after it’s powered up?