background image

  

FCC Warning

This product has undergone tests in pursuance of Part 5 of the FCC Regulations and has been found to 

meet the regulations for Class B devices, which are provided for reasonable protections while keeping the 

product from hazardous interference when installed and used. This product may emit radioactive energy while 

in use. Failure to install and use this product in accordance with the guidelines set out in the User s Manual 

may lead to hazardous interference generated by radio communications.

● To increase the distance between this product and the radio telecommunications  product.

● To adjust or re-orient the location of the antenna of the radio telecommunications  product.

● To connect this product to a different electrical outlet than one used for a radio telecommunications product.

● To contact local dealer for technical assistance.

In order to meet the FCC requirements , please use the grounded power cord provided and shielded ferrite 

core video adapter. All modifications conducted by the user without consent of local authorities shall void the 

operation of this product.   

Accessories Check

Please make sure you have these standard accessories with your device.

●Remote Control x 1pcs 

●AA Batteries x 2pcs 

●This User’s Guide x 1pcs

●Power Cord x 1pcs

●Warranty Card *1pcs

Important Statement

1

Summary of Contents for DVR5612
















































Reviews: