Vivitek DU9000, User Manual, Page: 4 / 61

®
3
OSD Menu - Control 36
Language 36
OSD Setting 36
Blank Screen 36
Projection Mode 36
Auto Power Off 37
Auto Power On 37
Startup Splash 37
Trigger 1 & 2 37
Auto Source 37
Infrared Remote 37
Network 37
OSD Menu - Service 38
Maintenance 39
Replacing the Lamps 39
How to Replace the Projector Lamp 39
Installing or Removing the Projection Lens 40
Remove Lens 40
Install Lens 40
Replacing the Filter 41
Outline Dimensions 42
Supported Signal Input Timing 43
3D Signal Input Mode & Timing 44
Serial Interface RS-232 Command 45
Communication Parameter Setup 45
Operation Commands 45
List of Operation Commands 46
Simulated IR Remote Controller Commands 52
Control the Projector Through a Network 53
Cable Connection 53
Connect the Projector to a PC 53
Connect with an External Integrated Video and Control Signal Transmission Box 53
Set Up the Projector for Networking 54
Control the Projector Through a Network 55
Control the Projector Through a Web Browser 55
Control Projector with the PJLink Protocol 58
Control Projector with TCP/IP Communication Protocol 58
Specificatons and Support 59
Specifications 59
Vivitek Support 60