15
Adjusting the Projector Height
The projector is equipped with 1 elevator adjuster foot and 1 rear adjuster foot.
These adjusters change the image height and projection angle.
1. Use the elevator adjuster foot to raise/lower the image to the desired height.
2. Use the rear adjuster foot to fine tune the horizontal angle.
To retract the foot, screw the adjuster foot in a reverse direction.
Note
•
To avoid damaging the projector, make sure that the elevator foot and adjuster foot are
fully retracted before placing the projector in its carrying case.
Adjusting the Projector Focus and Zoom
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.
2. Adjust the image size by sliding the zoom ring.
1
2
Elevator foot
Adjuster foot
Focus ring
Zoom ring
