Vivitek DDU6871, Remote Communication Manual

Page: 8 / 18

DDU6871/DW6851/DX6831 DLP Projector Remote Communication Manual
8
Focus focus +
- The camera control command does
not apply when the projector is in
standby mode.
Shift V vert.offset +
- The camera control command does
not apply when the projector is in
standby mode.
Shift H horiz.offset +
- The camera control command does
not apply when the projector is in
standby mode.
Load Memory lens.load = 1 to 10 The camera control command does
not apply when the projector is in
standby mode.
Edit Memory lens.save = 1 to 10 The camera control command does
not apply when the projector is in
standby mode.
Center Lens lens.center (execute) The camera control command does
not apply when the projector is in
standby mode.
Keystone v.keystone ?
=
+
-
-80 ~ 80 Do not apply when the projector is in
standby mode.
CONTROL
OSD function Operation
command Settings/return values Note
Standby Mode eco.net.pow ?
=
0 = Off (Standard Standby
Mode)
1 = On (ECO Standby
Mode)
Auto Power Off auto.powoff ?
=
0 = Off
1 = On Do not apply when the projector is in
standby mode.
Auto Power On auto.powon ?
=
0 = Off
1 = On
IP Address net.ipaddr ?
=
<String>
Subnet net.subnet ?
=
<String>
Gateway net.gateway ?
=
<String>
DHCP net.dhcp ?
=
0 = Off
1 = On
Baud Rate rs232.speed ?
=
0 = 115200 bps
1 = 57600 bps
2 = 38400 bps
3 = 19200 bps
4 = 14400 bps
5 = 9600 bps
6 = 4800 bps
7 = 2400 bps
8 = 1200 bps This command is not required as the
setting is default to "9600" when
RS232 commands are sent to the
projector through RJ45 cable by
external integrated video and control
signal transmission box.