Vivitek D8300 Series User Manual Download | Manualshive

Page: 3 / 80

background image

Page vi

General precautions

Do not open the cabinet. There are no user serviceable parts inside.

Use only the power cable provided.

Ensure that the power outlet includes a Ground connection, as this
equipment MUST be earthed.

Take care to prevent small objects such as paper or wire from falling
into the projector. If this does happen, switch off immediately, and have
the objects removed by authorised service personnel.

Do not expose the projector to rain or moisture, and do not place any
liquids on top of the projector.

Unplug before cleaning, and use a damp, not wet, cloth.

Do not touch the power plug with wet hands.

Do not touch the power plug during a thunder storm.

Handle the power cable carefully and avoid sharp bends. Do not use a
damaged power cable.

There are no user-serviceable parts inside the lamp module. The whole
module should be replaced.

Only lamps supplied by D8300 and intended for this
projector should be used. Fitting any other lamp could damage both
projector and lamp, and will invalidate the warranty.

Take care when removing the lamp module.

NEVER touch the lamp or

reflecto

r.

Take care not to touch the glass surface of the lamp module. If you
do accidentally touch the glass, it should be cleaned before use. (see
section 5. Maintenance.)

Do not use the lamp for more than 2000 hours, as this may cause
serious lamp failure, damage the lamp module and cause extra cost on
replacement.

HID lamps produce high intensity light. Do not look directly at the light
coming from the lamp housing, or the lens, or allow items such as
magnifying lenses to be placed in the light path. This could result in
serious eye damage.

Do not touch the ventilation outlets, as they will become hot in use.

Do not cover or obstruct the ventilation outlets or inlets.

Do not cover the lens whilst the projector is switched on. This could
cause a

fire

Always allow the projector to cool for 5 minutes before disconnecting
the power, moving the projector or changing the lamp.

Never use strong detergents or solvents such as alcohol or thinners to
clean the projector and lens.

Notes

«
1
2
3
4
5
...
»

Summary of Contents for D8300 Series

















































































Reviews:

No comments

Related manuals for D8300 Series

Brand: XGIMI Pages: 21

Brand: Black Lion Audio Pages: 2

LED PAR 64 COB 250W 5xWHITE Mk2

Brand: Flash professional Pages: 11

Brand: Chistie Pages: 182

Model C With CSR

Brand: Da-Lite Pages: 4

7600 - EMP XGA LCD Projector

Brand: Epson Pages: 10

Brand: Hitachi Pages: 5

Brand: Sony Pages: 2

Brand: Sony Pages: 2

CPJ-D500 - SVGA LCD Projector

Brand: Sony Pages: 2

CS20 - VPL SVGA LCD Projector

Brand: Sony Pages: 4

CW125 - VPL WXGA LCD Projector

Brand: Sony Pages: 14

Cineza VPL-HS60

Brand: Sony Pages: 2

CPJ-200 Operating Instructions / Mode d’emploi

Brand: Sony Pages: 15

CPJ-7 - Lcd Projector

Brand: Sony Pages: 26

Brand: Sony Pages: 28

Brand: Sony Pages: 54

CS20 - VPL SVGA LCD Projector

Brand: Sony Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands