Vivitek D8 PointRacer Series, User Manual

Page: 67 / 70

Preface
– 57 –
A
PPENDIX
I
RS-232C Protocol
RS232 Setting
Baud rate: 9600
Parity
check:
None
Data bit: 8
Stop bit: 1
Flow Con-
trol
None
Minimum delay for next command: 1ms
Control Command Structure
Header code Command code Data code End code
HEX Command Data 0Dh
ASCII
｀
V’ Command Data CR
Operation Command
Note:
XX=00-98, projector's ID, XX=99 is for all projectors
Return Result P=Pass / F=Fail
n: 0:Disable/1: Enable/Value(0~9999)
Command Group 00
ASCII Function Description Return Result
VXXS0001 Power On P/F
VXXS0002 Power Off P/F
VXXS0003 Resync P/F
VXXG0004 Get Lamp Hours Pn/F
VXXS0006 System Reset P/F
VXXG0007 Get System Status
0:Reset
1:Standby
2:Operation
3:Cooling
Pn/F
VXXG000 8 Get F/W Version Pn/F
Command Group 01
ASCII Function Description Return Value
VXXG0101 Get Brightness n=0~100 Pn/F
VXXS0101n Set Brightness n=0~100 P/F
VXXG0102 Get Contrast n=0~100 Pn/F
VXXS0102n Set Contrast n=0~100 P/F
VXXG0103 Get Color n=0~100 Pn/F
VXXS0103n Set Color n=0~100 P/F
VXXG0104 Get Tint n=0~100 Pn/F
VXXS0104n Set Tint n=0~100 P/F
VXXG0105 Get Sharpness 0~31 Pn/F