Vivitek D77 Series, User Manual

Page: 51 / 87

— 43—
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23
(“Enter” key pressed)
( ttt.xxx.yyy.zzz : IP-Address of the projector)
If Telnet-
Connection ready, and user can have RS232 command input, then “Enter” key pressed,
the RS232 command will be workable.
How to have TELNET enabled in Windows 7 / 8 / 10
By default installation for Windows, “TELNET” function is not included. But end-user can have it by
way of “Turn Windows features On or Off” to be enabled.
Open “Control Panel” in Windows
Open “Programs”