1
SAFETY INSTRUCTION
SYMBOL INSTRUCTION
!
WARNING
!
CAUTION
SAFETY PROTECTION MEASURES FOR SETTING
!
WARNING
For your safety, please read the instruction before using the wall mount bracket. Any improper disposition
caused by ignoring this manual may damage the hanger frame and result in personal injury and property damage.
Please keep the manual properly for future reference.
Please read the installation manual and safety instruction of the projector that matches our wall mount bracket
and operate according to the instruction.
In order to avoid personal injury and property damage, the following warning symbols are used in
this setting manual. Please make sure that you have understood all these warning symbols while
reading this instruction.
Ignoring this signal may lead to improper handling and result in
personal injury, even death.
Ignoring this signal may lead to improper handling and result in
personal injury or machine damage.
Useful messages.
Compulsory operations that must be conducted.
Recommended operations that should be conducted.
The wall mounted bracket is designed for installation of projector on walls. The weight of the installation object
other than the designed projector may damage the wall mounted bracket, and if the wall mounted bracket falls,
personal injury and property damage may happen.
Installation (wall installation) should be performed by specialists who have technical knowledge and ability.
Incomplete or improper installation may cause wall mounted bracket to fall, resulting in personal injury or
property damage.
Please install the wall mounted bracket according to this instruction.
Otherwise, the wall mounted bracket may fall and result in personal injury or an accident.
Operating power cord with care.
Improper operation could cause fire or electric shock. Please comply with the following requirements
while operating:
1
：
Do not operate the power plug when your hands are wet.
2
：
Do not use damaged and changed power cord.
3
：
Do not employ excessive force while pulling power cord when it passes through the wall mount bracket.
If the position of installation of the wall mounted bracket is prone to be affected by vibration and impact, please
do not install the wall mounted bracket.
Vibration and impact may damage the projector and the installation plate, or even may result in the wall
mounted bracket and projector falling, resulting injury of people and damage of property.
Talling the
wall mount bracket, please adopt methods that can support the projector and wall mount bracket as well as
to eliminate any vibration from the horizontal level.
M8 nut and screw should be applied. Nut and screw that are less than 8M may lead to hanger falling. DELTA is
disclaim from the responsible for any loss and damage caused by insufficient holding strength of the wall or improper
installation.
The installation should be conducted by two qualified person concurrently. If it is necessary to unscrew any nuts,
please take care that the wall mounted bracket does not fall. If the hanger or the projector falls, personal injury or
property loss may occur.
