DLP Projector—User’s Manual
7.
Reverse steps 1 to 6 to install
the new lamp module.
While installing, align the
lamp module and ensure it is
level to avoid damage.
Note:
The lamp module must sit
securely in place before
tightening the screws.
The lamp connector must be
connected properly and place
as drawing before Lamp
compartment cover
installation back.
Warning:
Lamp Connector must be installed flush with the connector base as shown in the image below.
A gap between the Lamp Connector and the connector base will cause damage to the projector.
The following images illustrate correct and incorrect Lamp Connector installations.
No Gap
Gap
Correct
Incorrect
–
35
–
