27
3.On-Screen Display (OSD) Menu Settings
USER MANUAL
Vivitek - D366 Series
User Manual v1.1
Brightness
●
Press
and use ◄/► to increase or decrease the brightness level of the image.
Contrast
●
Press
and use ◄/► to adjust the contrast level of the image..
ViviBlack
To enhance the black levels of the projected image dynamically per the content of the input signal.
●
Press
and use ▼/▲ to scroll through submenus
●
Projector Light:
Use ◄/► to turn ON/OFF
Color Manager
●
Press
and use ▼/▲ to scroll through submenus
●
Color:
to select and adjust the color(Red,Green,Blue,Cyan,Magenta,Yellow,White).
●
Hue:
Use ◄/► to adjust the Color Hue value
●
Saturation:
Use ◄/► to adjust the Color Saturation value
●
Gain:
Use ◄/► to adjust the Color Gain value
These three options are used to adjust the range of color input for the entire image. If minimal
amount of red, green or blue appears in the gray areas, lower the gain of the corresponding color
accordingly. As gain increases, the contrast of the image will become lower.
Advanced
●
Press
and use ▼/▲ to scroll through submenus
●
Brilliant Color:
Use ◄/► to adjust the brilliant color of image
●
Sharpness:
Use ◄/► to adjust the sharpness of image
●
Gamma:
Use ◄/►
t
o select the different chrominance of image.
When the ambient light is so bright that may affect the projection image in the dim area. , you can
change the gamma to adjust the chrominance. The available options are 1.8, 2.0, 2.2, 2.4, B&W,
Linear.
●
Color Temperature:
Use ◄/► to select the color temperature
Warm : make image reddish white.
Normal : Normal colorings of white.
Cold : make image bluish white.
●
White Balance:
Press
and use ▼/▲ to scroll through submenus
Use ◄/► to adjust Gain and Offset values of Red ,Green ,Blue color for white balance.
Gain: Adjust the brightness level of Red ,Green,Blue.
Offset: Adjust the contrast level of Red, Green,Blue.
Picture Mode Reset
This function will reset all Picture Mode to the defaut settings
Note:
“Picture Mode Reset “ is only reset according to input signal.
