DLP Projector – User’s Manual
–
31
–
Installation II Menu
Press the
Menu
button to open the
OSD
menu. Press the cursor
◄►
button to move to the
Installa-
tion II
menu. Press the cursor
▲▼
button to move up and down in the
Installation II
menu.
I
TEM
D
ESCRIPTION
Auto Source
Press the cursor
◄►
button to enable or disable automatic source detection.
Auto Power Off
(min.)
Press the cursor
◄►
button to enable or disable automatic shutdown of lamp when no signal.
Auto Power On
Press the cursor
◄►
button to enable or disable automatic power On when AC power is supplied.
Fan Speed
Press the cursor
◄►
button to toggle between Normal and High fan speeds.
Note
: We recommend selecting high speed in high temperatures, high humidity, or high
altitude areas.
Lamp Mode
Press the cursor
◄►
button to select the lamp mode for higher brightness or lower brightness
to save lamp life.
Advanced Press
(Enter) /
►
to enter the Advanced menu. See
Advanced Feature
on page 32.
Factory Reset
Press
(Enter) /
►
to reset all items to factory preset values.
Status Press
(Enter) /
►
to enter the Status menu. See page 35 for more information on
Status
.
