DLP Projector – User’s Manual
–
5
–
Bottom view
I
TEM
L
ABEL
D
ESCRIPTION
S
EE PAGE
:
1.
Lamp cover
Remove when changing the lamp.
X
36
X
2.
Height adjustor button
Push to release adjustor.
3.
Height adjustor
Adjuster drops down when adjuster button is pushed.
X
15
4.
Lens cap hook
To fasten the lens cap cover.
5.
Tilt adjustor
Rotate adjuster lever to adjust angle position.
X
15
6.
Ceiling support holes
Contact your dealer for information on mounting the projector on a ceiling.
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling
mount load capacity must exceed the weight of the installed equipment, and as an additional pre-
caution be capable of withstanding three times the weight of the equipment (not less than 5.15 kg)
over a period of 60 seconds
.
