Vivitar PDV3635, User Manual

Page: 14 / 15

14
Technological parameters:
Image sensor 16.0M (CMOS)×2
Functional mode Recording & shooting
Lens F2.2 f=1.6mm
Video resolution 3.5K(28fps)
、
3.5K(15fps)
、
2.7K(30fps)
、
960P(30fps)
Picture resolution 24M(6912*3456)
、
18M(6000*3000)
、
16M(5760*2880)
、
12M(4896*2448)
、
8M(4000*2000)
、
4M(2880*1440)
File format Video H.264 (MOV)
Image JPG
Storage medium TF card (supportive 32GB at most)
USB interface High-speed USB2.0 interface
Power supply Built-in high voltage lithium battery 1200mAh
Size 61.0*60.0*50.5mm
Instructions for use

The product is equipped with a built-in battery. Do not put it
directly into fire, or it may cause explosion or other dangers.

The product may radiate heat due to long-time use or exposure to
direct sunlight. This is normal.

If the camera stops working or fails to respond to any operation
during use, use a needle to press and hold Reset button for about
3 seconds to restart the product.

Do not use the camera under any environment with temperature
lower than 0
℃
or higher than 40
℃
; or else it may not turn on
normally.

Do not use the camera in humid place, for the humidity may
damage important parts of the camera.

Do not put the camera directly into water.

Do not use the camera during charging, for it may cause system
halt or other failure due to improper heat radiation.

Do not contact the lens with hard articles to avoid any damage.
Thank you again for purchasing this product. Have fun with it!