10
The following options appear:
Start:
Tap
Start
to open the ‘Add new camera’ screen and continue the setup.
Skip:
Tap
Skip
to skip
the setup for adding a new camera and go directly to the ‘Home’
screen.
Tap
Start
to begin setting up your new camera.
5.
NEW CAMERA SETUP
The ‘New Camera Setup/Connect to Camera’ screen opens.
The following options appear:
New
camera
setup:
Tap to setup and connect to a new camera.
NOTE: You can only turn on and connect one camera at a time during setup.
Connect
to
camera:
Tap
to open the ‘Connect camera’ screen and connect to an
existing camera(s) by searching for available cameras on your local Wi-Fi network, or
by using the QR code or camera UID/serial code.
Tap
‘
New
camera
setup
’ to continue the new camera setup.
6.
PLUG IN CAMERA / CAMERA SETUP MODE
Next a screen appears with instructions to verify that your camera is in setup mode so that
the app can connect to the camera’s Wi-Fi. This message is displayed:
“Plug in your camera and wait for the blue light to appear above the camera lens. Is the blue
light blinking?
” The following options appear:
No
,
Yes
Please plug in your camera.
After plugging in your camera, the LED light above the camera lens is activated as
follows:
T
he camera’s light first turns quickly light blue and then turns red for about 15 seconds.
Then the light turns off briefly, turns on red and then quickly changes to blue.
When the blue light above the camera lens begins blinking tap
YES
on the
CaptureCam2 app screen to continue the initial setup.
Tap
Yes
to continue.
This manual downloaded from http://www.manualowl.com
