6
- The LED charge light is ON while the battery is recharging.
- The LED charge light turns off when the battery is fully charged.
B. Charge the battery using the USB connection cable (included) and the AC Adapter
(included).
- Connect one end of the USB connection cable into the USB port on your camera.
- Connect the other end to the AC Adapter and then plug the AC Adapter into a power
socket.
- The LED charge light is ON while the battery is recharging.
- The LED charge light turns off when the battery is fully charged.
Note:
Some features, such as Flash, will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power
Medium battery power
Low battery power
2)
SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
Important
: You must use a Class 4 SD card or higher SD card only.
