4
Initial Camcorder Setup
INSTALLING AND CHARGING THE BATTERY
To Insert the Battery:
1) Slide open the battery/memory card compartment door.
2) Insert the battery properly into your digital camcorder, according to the polarity as shown above.
3) Make sure to insert the lithium battery all the way into the battery compartment.
4) The battery latch must then click into place
– which indicates that the battery is placed properly in
the compartment.
5) Close the door and slide back into place to securely close the battery/memory card compartment.
To Charge the Battery:
1) Upon first use make sure the battery is fully charged.
2) To charge the battery, insert the battery correctly into the camcorder and make sure the camcorder
is powered off.
3) Proceed with one of the following steps below to charge the battery:
A. Charge the battery using the supplied USB connection cable and your computer:
