Vivitar 840XHD, Owner'S Manual

Page: 8 / 101

7
Preparing Your Camera for Use
Battery Installation
Your DVR camcorder requires a Lithium-ion rechargeable battery (included in packaging).
Open the battery compartment on the bottom of the camera.
1. Insert the batteries in accordance with the polarity (+ and - ) as indicated.
2. Close the battery cover.
Note: You must ONLY use the supplied AC charger to recharge the battery. The
camera should be Off while charging. Allow the battery to fully charge first. This should
take approximately 6 hours.
The battery cannot be charged by connecting the camera via the USB cable to the
USB port of your computer.