Vivint SR1410, Installation And User Manual, Page: 13 / 38

SR1410 Installation and User Guide Page 13
SR1410 Installation & User Guide Ver. 0.01
protection. If moisture enters a connector, it may cause a degradation in performance or even a
complete failure of the link.

Snow and Ice — Falling snow, like rain, has no significant effect on the radio signal. However, a
buildup of snow or ice on antennas may cause the link to fail. In this case, the snow or ice
1.3 Ethernet Cabling
When a suitable antenna location has been determined, you must plan a cable route from the SR1410
wireless router outdoors to the equipment indoors. If a power injector/adapter module is used, it is for
indoor installation only. Consider these points:

The Ethernet cable length should never be longer than 90 m (295 ft)

Determine a building entry point for the cable

Determine if conduits, bracing, or other structures are required for safety or protection of the cable

For lightning protection at the power injector end of the cable, consider using
Example Installations: